9litre RUB rack

boywonder · #1 (**permalink**) 29-04-2008, 07:21 PM

Hi i made a Realy Usefull Box rack that holds 8 9litre rubs and uses 4 11x11 heatmats but i don't need it any more and was about to get rid of it when i thought someone on here might want it, its made from melamine faced mdf and all seen edges are edged with tape. no mats are included by the way

and no RUBs either, its just the wood. its flat pack and realy easy to put together with no screws. its actualy 4 tiers high but no pic, dimensions are around 650mm tall 720mm wide and 550mm deep i can measure exactly if its important.

it has slots for thermostat probes on all levels however i ran all 4 mats from one mat stat.
open to reasonable offers and may deliver for cost.

Dirtydozen · #2 (**permalink**) 29-04-2008, 08:40 PM

how much you wanting for it

boywonder · #3 (**permalink**) 29-04-2008, 09:57 PM

must be worth £20 of anybodys money, its white by the way and fits RUBS without lids. there is a 4mm gap above the rim of the rub once inside the carcase. i can deliver within reason for costs too if that helps?

Dirtydozen · #4 (**permalink**) 29-04-2008, 10:14 PM

will have a think about it, what would you thik to a small snake getting out the gap, would of pefered it to be able to keeplids on

boywonder · #5 (**permalink**) 29-04-2008, 11:10 PM

rubs dont quite fit in with the lids on but the gap is 4mm from the top of the rub, a biro pen doesn't fit through, i don't know how small snakey snake babies are, it was made for leos

amber_gekko · #6 (**permalink**) 30-04-2008, 10:22 PM

Quote:

Originally Posted by boywonder

rubs dont quite fit in with the lids on but the gap is 4mm from the top of the rub, a biro pen doesn't fit through, i don't know how small snakey snake babies are, it was made for leos

Snake babies especially corns can get out of any small gap, ive had yearlings escape from rubs with lids on so i wouldn't fancy ones without for snakes, good for lizards though or other bigger hatchlings like royals surely they couldn't get out!!

Bar1 · #7 (**permalink**) 30-04-2008, 11:27 PM

whats the overall measurements please mate

boywonder · #8 (**permalink**) 01-05-2008, 06:09 PM

its 660mm tall by 722 wide by 550 deep but braintree is about 4 hour drive from me. a bit far to deliver, sorry

boywonder · #9 (**permalink**) 03-05-2008, 09:38 PM

still for sale

boywonder · #10 (**permalink**) 05-05-2008, 06:49 PM

doesn't have to be 4 stacks high, could be 1,2,or 3 tiers high or i could even make it bigger for a bit more cash

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode