|
20-11-2009, 09:27 PM
|
||||
|
||||
AHS heater thermostat temp
hiya Jeff Pollitt is comming to mine tomorrow to assemble a 6ft long by 6ft high by 3ft wide viv. In it ill be having a 500 watt AHS heater for its ambient air temp and a powersun for its UV and basking heat. The question im asking is what temperature should I set the stat on the AHS heater?????
|
||||
|
20-11-2009, 09:56 PM
|
||||
|
||||
Martin not being funny but dont you take any notice i told you how to do this on 1 of your previous threads,install it use a thermometer and adjust the temp to what the thermometer reads,but do it with out the powersun on this will then set your ambient temp,then when the power sun is on (not on a stat),the stat in the AHS will contol the temp
__________________
MY TYRES ARE KNACKERD AND MY KNACKERS ARE TYRED Reps 1.0.0 Blackthroat monitor Larry Others 1.0.0 Rabbit Bobby 1.0.0 Irish staff Dollar
|
|
20-11-2009, 10:57 PM
|
|||
|
|||
|
what would you set as the ambient temp??? about 90 - 95f???? Am I right? Lastly do I have to mess about with the stat on the AHS heater at night? As it should be 21C I know that!!!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| temp thermostat | tina b | Equipment Classifieds | 3 | 11-05-2009 09:40 AM |
| Do I need a thermostat? And what temp should it be? | ukdeveloper | Newbie Advice | 24 | 14-03-2009 12:49 AM |
| Thermostat for fan heater (2000W) | ladybird | Equipment & Supplies | 4 | 26-06-2008 03:49 PM |
| thermostat and two heater | trbjones | Lizards | 2 | 13-01-2008 08:55 PM |
| wanted...stat...ceramic heater...temp gauge | wetdog | Snakes | 0 | 10-02-2006 01:06 AM |
Linear Mode
