|
11-01-2007, 06:53 PM
|
||||
|
||||
building my viv
hey im gonna be building a viv soon for 3 young leopard gecko's and i need a lil infomation on what stuff to use, good methods etc
best type of wood to use ? should i use no more nails or what ? ideal measurements for a viv with 3 leopard gecko's ideal method to install sliding doors. and average price on how much you think this is gonna cost . Thankies 
__________________
|
|
11-01-2007, 07:09 PM
|
||||
|
||||
|
contiboard/melamine (same thing) is what most people use. it's easy to clean down and not to expensive. it comes in loads of colours and you can get it from places such as b&q, homebase, focus etc...
i would imagine for 3 geckos you'd need something about 3ft wide x 18inches/2ft deep x 18inches tall. bigger if poss, can never be to big to seal the viv i'd use a bathroom type sealant and make sure it drys and airs out well before using the viv. to install glass doors you'll need to get runners and these can be bought from most DIY stores or ebay. get you glass straight from the main person if you can, it'll be cheaper. phone around for it. i'd imagine it'd be about £20-£30 for glass. wood would prob be around £40 at a guess good luck
__________________
3 whites tree frogs, 1 water dragon 1 kune kune pig 2 german shepherds, british bulldog and 1 cyprus poodle 
|
|
11-01-2007, 07:19 PM
|
||||
|
||||
|
Re: building my viv
Quote:
Wouldn't matter what you use realy, as long as its secure 3ft long 12-18inch high and 15inch depth you can get special things for sliding doors, sliding door rails ? dunno what there called. there just to rows 1 glass in iach row and yu can slide them It would cost about £50-£60
__________________
1.1 Epicrates cenchria Crassus - Carr and Carrla1.4 Python Regius - Nyoka and Meesha0.1 Varanus Acanthuras - Irwin
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
