Being clumbsy I mananged to drop a piece of the glass from the front of my viv whilst cleaning it. So I now need to find a glazer to get a new bit cut.

Does anyone know how much roughly speaking for a 4mm thick piece of glass 450mm x 515mm??

It would need the sanded edge or whatever it is they do to blunt the sides.

__________________
Eggs incubating. Should have Mack snows, Mack Supersnows, Tangerines het albinos, Patternless, Mack Patternless and of course nornals on the way!!! All possibly het for patternless albino!!!

I think I paid about £18 for a peice about that size-ish with polished edges- thats the expensive bit!!

__________________

find a double glazing manufacture there not glass specilest (sp) so not as expensive
thats where i get all of mine from and its a lot cheaper than a proper glass supplier

__________________
royalsmore than a few

£6.50 for 4mm toughened with the edges taken off.

Crafty - where do you go for yours, just in case I have a go at building my own sometime

cheers

well your in halifax so id say go to warmshield windows on
hopwood lane just above the college
i used to work there so i know there pretty cheap

__________________
royalsmore than a few

Nice one - cheers

The above wont be toughened is it?
For normal 4mm its only about £2 for that size!

you won't need the edges polished.
You're only replacing 1 piece of glass and the glass will have an overlap so use your polished piece for the inside. The snake or lizard won't have to come into contact with the unpolished edge saving you cash.

__________________

most vivs dont have bevelled edges anyway. Standard shop vivs dont...

__________________