Reptile Forums - View Single Post - U.V Help :s
Thread: U.V Help :s
View Single Post
  #6 (permalink)  
Old 24-01-2013, 04:35 PM
krystalk's Avatar
krystalk krystalk is offline
Join Date: Jan 2013
Location: surrey. UK
Posts: 11

Originally Posted by Jeffers3 View Post
I hate to break it to you, but that viv won't be suitable for very long. Apart from anything else, it's way too small. The viv you have is 862.5 x 490 x 434 mm. It needs to be closer to 1230 x 615 x 615.

An adult beardie is likely to be somewhere between 400-500 mm long (and could even get larger than that), so it needs a big viv.

I can't see the vents on that viv, so I can't comment, but it's easy to add vents, or block them off.
im aware we need a bigger one anyway were going to upgrade in about 6 months we have the 4ft one atm because we didnt think we could fit a bigger one but after alot of rearranging we found room for one much bigger and plus were going to be moving house in about a years time to a bigger place so the size wont be an issue

and about the metal runners along to front i checked and it isn't sharp at all i cant even fit my finger nail under there but i read somewhere you can seal it with a some kind of silicon or something :s so i will look into that more.
Reply With Quote