Reptile Forums banner
vents
1-20 of 40 Results
  1. Snakes
    Hi, I'll be getting a new viv soon (110*45*45cm) and was wondering about 2 things: 1) I've read here, that the heat matt will struggle to warm up the enclosure and I should get a ceramic (100W) bulb as well. I take it I will need a second (dimming or pulse) thermostat for the bulb? 2) where...
  2. Equipment Classifieds
    long side the custom viv builds, I am also offering a spare parts ad repairs service. Prices starting from £2 the parts include, Glass runners, both clip on and glue on Vivarium vents 70mm round Cut Glass 4 and 5mm Glass handles if there are any parts you are looking for or even a quote on...
  3. Lizards
    Hello im looking to get a few leopard geckos next month when I move out. My girlfriend has said I can keep them under the stairs I just wanted to ask does anyone keep them here or does anyone see any issues with this? I would be taking the door off the under stairs area so it would just be...
  4. Habitat
    I am building a big for my new baby crested geckos, and just want a bit of confirmation I'm doing it right and an outside view to make sure I haven't missed anything silly! So, I'm building the Viv out of 18mm hard wood plywood, the Viv is going to be 800mm tall, 400mm deep, 400mm wide, and...
  5. Habitat
    Hi All, As the manufacturer of the VivExotic vivariums we are asked at times for spare parts. To facilitate this we have set up a separate website, where you should be able to find parts for old and new vivariums. www.vivspares.co.uk I hope this may be of interest to some or all of you...
  6. Equipment & Supplies
    Hi All, As the manufacturer of the VivExotic vivariums we are asked at times for spare parts. To facilitate this we have set up a separate website, where you should be able to find parts for old and new vivariums. www.vivspares.co.uk I hope this may be of interest to some or all of...
  7. Habitat
    Hi guys, just wondering before I order if I would be able to fit this into my wooden viv without vents??? Arcadia Aquarium Electronic Controller 18-40w T8 Twin ACE2U8 | eBay Thanks! -Luke
  8. Habitat
    Hi, I have the following vents: (VIVARIUM 70mm White HiGH FLOW air VENTS only **99p per PAIR** + Low Cost postage | eBay) Anywho, as I will be feeding small Earless Lizards - Their food will also be small. Which then makes me wonder whether crickets and the like will be inclined to climb...
  9. Habitat
    Hi all, I was just after a bit of advise. I am new to keeping snakes. I am coming to the end of a project to build 2 matching terrariums for me and my son to house corn snakes. Each measure internally 1150x450x450, constructed using 18mm Oak veneered MDF. I liked the look of the new...
  10. Snakes
    Hi, I have been given a viv, and the vents are lose on it and when the wires for the UV fixing move the vents fall out. I am not sure what to fix the vents in with as I haven't had to do it before for any of my other vivs as they are viv exotics and are being used for lizards, but as this viv...
  11. Habitat
    Hi folks trying to find some vents for 2ft vivs, I have found the 70mm ones but they seem too big for a 2ft viv and I think that they will not keep enough of the heat in. Some of my other 2ft vivs have 40mm round vents in but I can't find any online for some reason, maybe stupidity (it has been...
  12. Snakes
    was looking for vents for my new viv build and found these in family bargains. 99p for the pack. worked a treat and look loads better than the plastic ones. theres 1 missing from the pack cos i already stuck it in my viv :2thumb:
  13. Equipment Classifieds
    hi, Im looking for 2 pairs of 5ft runners and 2 pairs of 3ft runners. want them all in black and in 4mm. Can anyone beat the prices im getting from ebay????
  14. Habitat
    i have vivexotic viv which has 4 vents at the back and im planning to gorila glue the background and the sides so how do i remove the vents, fill the holes of where the vents were and then put the vents at the front 2 above the doors 2 below can someone help,
  15. Habitat
    Hi, Im building 2 new vivs 5ft x 2ft x 2ft out of 18mm MDF and sealing it with yatch varnish, I hear everyone on here sayin yatch varnish is safe.. I will be housing my rankins in both and was wondering best place and how many and what size vents i should put in it? i have 4 lucky reptile fans...
  16. Habitat
    Hi Guys and Girls I am in the middle of making a viv stack for a bearded dragon, an African Pygmy Hedgehog and Leopard Geckos. Can someone help with what size/shape/amount of vents I will need for each of these as I have looked on the net and get various answers? Thanks Amy
  17. Equipment & Supplies
    This is my 1st Viv Build for bearded dragons and i have a few questions if anyone could help. Tanks are 4ft x 2ft x2ft top tank and 2 2ft x 2ft x 2ft Tanks underneath. Firstly im a little unsure about vent locations and how many i need in each section. Will probably go for the 65mm Round...
  18. Lizards
    I was wondering if someone could advise me on the best thing to do! The viv that i have has 3 vents along the top of the back wall which i have some artificial plants hanging from, i was thinking about taking these out but doyal my beary tends to shuffle behind them and sleep there and im...
  19. Habitat
    hi would anyone be interested in these?
  20. Habitat
    i was thinking, instead of vents, could i use pc-like fan to draw fresh air through the viv...?
1-20 of 40 Results
Top