Reptile Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,551 Posts
Discussion Starter · #1 ·
Anyone currently using or have used a heater tube, the sort that can be used for a green house or conservatory, as the main ambient heat source in a viv. They seem a good price and come in lengths up to four feet or so so could be mounted at the back of the viv near the floor. With a suitable guard against any burning accidents and a thermostat I think they should be fine. Appreviate anyone with experience of using these.
Phil
 

·
Registered
Joined
·
2,551 Posts
Discussion Starter · #3 ·
I'd considered that Mark and they do a 2ft Tube which I reckon would be fine in a 4ft viv with a thermostat at the tube end to get the gradient. Anyone else think that'll work, can't see that it wouldn't
 

·
Registered
Joined
·
2,551 Posts
Discussion Starter · #9 ·
simonc said:
I use tubes on vivs from 4-8 ft and find them exellent,mine are controled by pulse stats and have heavy mesh guards.They are very good for providing an ambient back ground temp and when combined with a spot for a basking area are very good for most boid spp.
I also have a 1ft tube in my incubator and get only one degree variance from top to bottom!!
what are you planning to heat ?
Am looking to heat a four foot viv for my two Hogg Islands. I think a 2ft tube with guard plus a ceramic bulb as spot heat during the day and off at night would give a good gradient ambient both day and night plus a decent basking area during the day, what do you guys reckon?
Phil
 

·
Registered
Joined
·
2,551 Posts
Discussion Starter · #10 ·
Have found this company on a web search for tube heaters. about half the price of some places 2ft tube plus guard delivered less than £25. I'll let you know how it all pans out
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top