Reptile Forums banner
1 - 14 of 14 Posts

·
Registered
Joined
·
24 Posts

·
Registered
Joined
·
196 Posts
Discussion Starter · #7 ·
Any idea where i can get the hose to go from the regulator. Chap at Machine Mart said you could not get the stuff as it only comes attached to the Mig Welder which sounds like utter rubbish so my question is how has every one else done it lol! Not sure on the size of the pipeline either as he was either unable or to be honest could not be bothered telling me. Your ideas as always are appreciated! :2thumb:
 

·
Registered
Joined
·
817 Posts
Aquarium hose is what I used, I put the end in boiling water then stretched it over.

Depends on the regulator.

If you get a regulator then you can measure it. :whistling2:

Steve
 

·
Registered
Joined
·
817 Posts
Aquarium hose is what I used,
Have got the gas and the regulator. Just looking for the hoze now. Was thinking along the line of fishtank air line if all else failed but want the proper hose if available for a good fit.
Think that what most people use :whistling2:

Take the regulator to the shop and they should be able to sort you out :2thumb:

Steve
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top